Skip Navigation Links Setup New Post Search Forum Home Home Decoder

Original Message

RE: Re; 390 breathing system By R Shannon - 01/04/2002 12:38:05 PM; IP 205.188.192.171 another thing to consider is what year intake and heads you are using. Basiclly both sides of the valve covers have to be vented, some use PCV valves, and some are vented through the oil filler cap. Later 60s stye routed vented crank case air through the carb or intake for emissions proposes. I think if you have a spacer a hose would have to be connected or plugged you would have a big vacuum leak at that point. usually both sides of the heads are vented, but depends on the year and intake and heads you are using. Maybe you'll get more of a specific answer than this.

This thread, so far...

Skip Navigation Links.  Re; 390 breathing system -- David Siedschlag, 01/03/2002 RE: Re; 390 breathing system -- R Shannon, 01/04/2002  RE: Re; 390 breathing system -- Royce Peterson, 01/04/2002  RE: Re; 390 breathing system (Royce) -- David Siedschlag, 01/04/2002  RE: Re; 390 valve on pass. side exhaust -- David Siedschlag, 01/04/2002  RE: Re; 390 valve on pass. side exhaust -- Royce Peterson, 01/04/2002

Post A Response

Subcribe

Name: Email Address: Subject: Post: Upload Image: Human Check:   Enter the code 202411511 in the box