Skip Navigation Links Setup New Post Search Forum Home Home Decoder

Original Message

427/428 head mill By Ed - 01/17/2002 10:11:18 AM; IP 209.223.8.35 Any good method of determining if a 427/428 head has been milled other than CC the chamber - I have been tempted to purchase a pair of heads at a swap meet, but have been leary due to the lack of a quick way the verify if they have been milled. Can the oil transfer slot be measured for depth or a measurement taken with a depth mike from the head surface down to the valve seat area / spark plug area to check for a previous mill job? Thanks for your help.

This thread, so far...

Skip Navigation Links. 427/428 head mill -- Ed, 01/17/2002  Measure the oil transfer slot depth -- Bill Conley, 01/17/2002  Intake bolt hole to deck distance seems reliable. -- Dave Shoe, 01/17/2002  It looks like you're right Shoe! -- Bill Conley, 01/17/2002  RE: 427/428 head mill -- Ed, 01/17/2002

Post A Response

Subcribe

Name: Email Address: Subject: Post: Upload Image: Human Check:   Enter the code 202485140 in the box