|
|
|
|
Original Message
|
| Heads |
| By Ed Foral - 03/30/2002 9:23:23 PM; IP 64.12.107.44 |
If you pull a valve cover, you should see if your heads are 289 or 302, as either a 302 or 289 should be cast there. Also, the casting date of the heads will be there, and it can be compared with the assembly date stamped on the front of the engine. The block casting number is behind the starter to see if it is a 289 or 302 block.
None of this will prove if a 289 or 302 crank is in the block, but you may infer it.
Ed |
|
|
This thread, so far...
|
|
|
|
Post A Response
|
|
|
|
|
|