|
|
Original Message
|
RE: It's also possible... |
By Courtney Bolze - 11/15/2002 8:07:55 PM; IP 207.68.50.27 |
I had the same problem. Mine was the bolt was too long and bottomed out, as the threads did not go all the way through to the water jacket. I tapped the hole all the way and used sealer on the threads. Check and see if the threads on the bolt are distorted when you remove it Phil, annother sign is if the bolt has to be wrenched all the way back out. Courtney. |
|
This thread, so far...
|
|
Post A Response
|
|
|
|