|
|
|
|
Original Message
|
| RE: Best intake & carb for low RPM 390 truck motor |
| By Gerry Proctor - 02/13/2003 2:15:11 PM; IP 207.133.188.254 |
Well you could go to an Edelbrock Performer (not the RPM) if you're only interested in low-rpm grunt but it's not going to be a remarkable improvement over the iron 2bbl in the rpm range you're interested in. About all you're going to accomplish is saving some weight. I think the Edelbrock Performer series of intakes has become the consumer standard as far as delivering promised performance in their design range. I would avoid that Weiand single plane at all costs.
If you did go to a replacement intake, go with the Holley 1850-series 600 cfm vacuum secondary or the comparable Edelbrock 600 CFM. You could also use the Autolite 4bbl, but it's so much easier going with something new that doesn't need a rebuild. |
|
|
This thread, so far...
|
|
|
|
Post A Response
|
|
|
|
|
|