|
|
|
|
Original Message
|
| RE: Restricted Oil Flow in valve train |
| By Tim - 10/10/2003 2:26:17 PM; IP 24.62.109.4 |
| Could be the wrong bolts used at the oil feed ports, there should be two "necked down" rocker bolts at these oil feeds, drivers side would be second bolt from the front, passenger would be second from the rear. If you line up all four bolts, you will see the difference. |
|
|
This thread, so far...
|
|
|
|
Post A Response
|
|
|
|
|
|