Skip Navigation Links
Setup
New Post
Search
Forum Home
Home
Decoder

Original Message
RE: C3AE-C rods and forged pistons? Pitfalls?
By R. Hunt - 11/20/2004 8:48:31 AM; IP 162.40.31.248
Almost forgot to ask, what is the piston to cylinder wall clearance supposed to be for these pistons? I have looked everywhere and cannot find this information.

I would probably be right if I said that these cylinders are not to tight for these pistons. This engine has been dissassembled and honed and reassembled at least twice and getting ready ro a third honing. Also having close to 20,000 miles on it since being bored must have increased the clearances a bit. I'll check everything out just to be sure though. I can get the piston to wall clearances right on the money. The balance problem and solution just isn't something I have any experience with.

Is it possible to machine enough weight off of these pistons to solve the balance issue if needed? Or do you have to take material off of the rods too?

Sorry fo asking so many questions.
This thread, so far...
Skip Navigation Links.
Collapse <a href=../ForumFE/reply.aspx?ID=23286&Reply=23286><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor23286" onclick="return false;">C3AE-C rods and forged pistons? Pitfalls?</a>&nbsp;-- <font color=#0000ff>R. Hunt, <i>11/18/2004</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=23286', contentMargin: 60, icon: $('anchor23286') }); </script>  C3AE-C rods and forged pistons? Pitfalls? -- R. Hunt, 11/18/2004
Collapse <a href=../ForumFE/reply.aspx?ID=23301&Reply=23286><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor23301" onclick="return false;">RE: C3AE-C rods and forged pistons? Pitfalls?</a>&nbsp;-- <font color=#0000ff>McQ, <i>11/19/2004</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=23301', contentMargin: 60, icon: $('anchor23301') }); </script>  RE: C3AE-C rods and forged pistons? Pitfalls? -- McQ, 11/19/2004
 RE: C3AE-C rods and forged pistons? Pitfalls? -- R. Hunt, 11/20/2004
Collapse <a href=../ForumFE/reply.aspx?ID=23304&Reply=23286><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor23304" onclick="return false;">RE: C3AE-C rods and forged pistons? Pitfalls?</a>&nbsp;-- <font color=#0000ff>giacamo, <i>11/20/2004</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=23304', contentMargin: 60, icon: $('anchor23304') }); </script>  RE: C3AE-C rods and forged pistons? Pitfalls? -- giacamo, 11/20/2004
Collapse <a href=../ForumFE/reply.aspx?ID=23317&Reply=23286><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor23317" onclick="return false;">RE: C3AE-C rods and forged pistons? Pitfalls?</a>&nbsp;-- <font color=#0000ff>R. Hunt, <i>11/20/2004</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=23317', contentMargin: 60, icon: $('anchor23317') }); </script>  RE: C3AE-C rods and forged pistons? Pitfalls? -- R. Hunt, 11/20/2004
Collapse <a href=../ForumFE/reply.aspx?ID=23327&Reply=23286><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor23327" onclick="return false;">RE: C3AE-C rods and forged pistons? Pitfalls?</a>&nbsp;-- <font color=#0000ff>giacamo, <i>11/20/2004</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=23327', contentMargin: 60, icon: $('anchor23327') }); </script>  RE: C3AE-C rods and forged pistons? Pitfalls? -- giacamo, 11/20/2004
 RE: C3AE-C rods and forged pistons? Pitfalls? -- R. Hunt, 11/21/2004
Collapse <a href=../ForumFE/reply.aspx?ID=23343&Reply=23286><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor23343" onclick="return false;">RE: C3AE-C rods and forged pistons? Pitfalls?</a>&nbsp;-- <font color=#0000ff>R. Hunt, <i>11/22/2004</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=23343', contentMargin: 60, icon: $('anchor23343') }); </script>  RE: C3AE-C rods and forged pistons? Pitfalls? -- R. Hunt, 11/22/2004
Collapse <a href=../ForumFE/reply.aspx?ID=23345&Reply=23286><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor23345" onclick="return false;">RE: C3AE-C rods and forged pistons? Pitfalls?</a>&nbsp;-- <font color=#0000ff>giacamo, <i>11/22/2004</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=23345', contentMargin: 60, icon: $('anchor23345') }); </script>  RE: C3AE-C rods and forged pistons? Pitfalls? -- giacamo, 11/22/2004
 RE: C3AE-C rods and forged pistons? Pitfalls? -- R. Hunt, 11/22/2004
Collapse <a href=../ForumFE/reply.aspx?ID=24619&Reply=23286><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor24619" onclick="return false;">RE: C3AE-C rods and forged pistons? Pitfalls?</a>&nbsp;-- <font color=#0000ff>walt, <i>04/17/2005</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=24619', contentMargin: 60, icon: $('anchor24619') }); </script>  RE: C3AE-C rods and forged pistons? Pitfalls? -- walt, 04/17/2005
 RE: C3AE-C rods and forged pistons? Pitfalls? -- walt, 04/25/2005
Collapse <b>RE: C3AE-C rods and forged pistons? Pitfalls?</b>&nbsp;-- <font color=#0000ff>R. Hunt, <i>11/20/2004</i></font>RE: C3AE-C rods and forged pistons? Pitfalls? -- R. Hunt, 11/20/2004
Collapse <a href=../ForumFE/reply.aspx?ID=24624&Reply=23286><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor24624" onclick="return false;">RE: C3AE-C rods and forged pistons? Pitfalls?</a>&nbsp;-- <font color=#0000ff>giacamo, <i>04/17/2005</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=24624', contentMargin: 60, icon: $('anchor24624') }); </script>  RE: C3AE-C rods and forged pistons? Pitfalls? -- giacamo, 04/17/2005
Collapse <a href=../ForumFE/reply.aspx?ID=24625&Reply=23286><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor24625" onclick="return false;">RE: C3AE-C rods and forged pistons? Pitfalls?</a>&nbsp;-- <font color=#0000ff>R. Hunt, <i>04/17/2005</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=24625', contentMargin: 60, icon: $('anchor24625') }); </script>  RE: C3AE-C rods and forged pistons? Pitfalls? -- R. Hunt, 04/17/2005
Collapse <a href=../ForumFE/reply.aspx?ID=24626&Reply=23286><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor24626" onclick="return false;">RE: C3AE-C rods and forged pistons? Pitfalls?</a>&nbsp;-- <font color=#0000ff>giacamo, <i>04/17/2005</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=24626', contentMargin: 60, icon: $('anchor24626') }); </script>  RE: C3AE-C rods and forged pistons? Pitfalls? -- giacamo, 04/17/2005
Collapse <a href=../ForumFE/reply.aspx?ID=24637&Reply=23286><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor24637" onclick="return false;">RE: C3AE-C rods and forged pistons? Pitfalls?</a>&nbsp;-- <font color=#0000ff>John, <i>04/19/2005</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=24637', contentMargin: 60, icon: $('anchor24637') }); </script>  RE: C3AE-C rods and forged pistons? Pitfalls? -- John, 04/19/2005
Collapse <a href=../ForumFE/reply.aspx?ID=24752&Reply=23286><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor24752" onclick="return false;">RE: C3AE-C rods and forged pistons? Pitfalls?</a>&nbsp;-- <font color=#0000ff>walt, <i>04/27/2005</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=24752', contentMargin: 60, icon: $('anchor24752') }); </script>  RE: C3AE-C rods and forged pistons? Pitfalls? -- walt, 04/27/2005
 RE: C3AE-C rods and forged pistons? Pitfalls? -- John, 04/27/2005
Post A Response
Name:
Email Address:
Subject:
Post:
Upload Image:
Human Check:   Enter the code 202431258 in the box