|
|
Original Message
|
RE: 427 top oiler? |
By Big Dave - 02/28/2005 12:43:07 PM; IP 64.12.117.7 |
if it didn't need an overbore, as much as 2-3k for a nos block, if it does need a bore over, maybe a little less. If you can get it for cheaper, you are very lucky. And if you plan to bore it over, go as little as possible. Custom pistons are readily available for the 427, cause re-sleeving a block is more expensive than custom pistons. |
|
This thread, so far...
|
|
Post A Response
|
|
|
|