|
|
Original Message
|
RE: You must not have much experience with stock ones |
By walt - 04/30/2005 9:46:19 PM; IP 68.42.151.124 |
sorry,i got a few of the original ford shifters out of both big and small,and the long trans,they don't have any adaptors on them,just dif rods and levers,ihave pulled the adaptors out of the cj's and the boss 302's that had hurst shifters in them,the stock fords bolted right on the bosses on the tail housing,another example,took a 302 with a c4 auto out of a 68 cougar,put in a modified 351 w,installed the clucth ped from a 67 bb must,equalizer from 69 sb,65 289 hp 4 spd trans,(narrow bolt pattern)and used the ford shifter from the 390 67 mustang,also the rear end from it,put the short yoke on the rear that had the small block universals,so we didn't have to shorten the shaft,changed the front core support to the big block for the larger radiator,had to change the water pump to match the outlets on the rad,put the 67 bb trans in the boss 302,with the adaptor.the lunched his trans,until we could parts for it |
|
This thread, so far...
|
|
Post A Response
|
|
|
|