|
|
|
|
Original Message
|
| If it's retrofit and you don't need factory... |
| By Gerry Proctor - 06/01/2005 6:35:11 AM; IP 207.133.188.254 |
Try here:
http://www.oldairproducts.com/shop/index.php?cPath=30000000_60000000&osCsid=b08ca78b4bbdd174659cab0c7af69606
Under the Ford brackets, you can get the entire aftermarket retrofit assembly. You can also get the adapter bracket alone under "brackets" that mounts a Sanden compressor in place of the York if you have some of the parts.
Just FYI, there were various configurations for factory FE A/C brackets. While most will work, there are year-to-year and model-to-model changes. Some use a tensioner and idler, some don't. Some use additional bracing, some don't. I only bring this up so that you know to get the whole shebang from one car, rather than bits and pieces. You'll of course need a crank pulley to drive the A/C so the more complete, the better. |
|
|
This thread, so far...
|
|
|
|
Post A Response
|
|
|
|
|
|