Skip Navigation Links
Setup
New Post
Search
Forum Home
Home
Decoder

Original Message
RE: Probably the Fel Pro intake gaskets leaking
By glennz - 07/08/2005 5:35:47 PM; IP 68.73.57.157
well iwould agree withg the gaskets, accept these ones are brand spanking new...was smoking before new gaskets and after...heads not warped just had all surfaces milled to flat even the intake, all within .005 so not much to get clean

here again is what is going on, car started smoking after sitting a while after running. dissassmbled upper half of motor, inspected intake gaskets and head gaskets, all looked great, milled all mating surface, reassmble motor, and run, still smokes after running a while and sitting, NEVER smokes while running ( after initial start )

i am leaning more twords crack in aluminum head or intake intake is edelbrock rpm, and heads are edelbrock aluminums, car has been running for over 2 years with no problems, then all of a sudden smoking ANTIFREEZE

possibly small pinhole in cylinder, but radiator pressures never exceeded 13 lbs, usually a crack or leack in cylinder will give you increased pressure and or overheating, neither of which this has..

the initail post was to see if anyone has had problems with the FE aluminum heads and intake, have used their products on many other cars but not an FE, is there a history of problems with htese heads and intakes


glenn
This thread, so far...
Skip Navigation Links.
Collapse <a href=../ForumFE/reply.aspx?ID=25267&Reply=25267><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor25267" onclick="return false;">need help with a 67 390 mustang</a>&nbsp;-- <font color=#0000ff>glenn, <i>07/05/2005</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=25267', contentMargin: 60, icon: $('anchor25267') }); </script>  need help with a 67 390 mustang -- glenn, 07/05/2005
Collapse <a href=../ForumFE/reply.aspx?ID=25269&Reply=25267><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor25269" onclick="return false;">Antifreeze leaking into the intake maybe</a>&nbsp;-- <font color=#0000ff>Royce, <i>07/06/2005</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=25269', contentMargin: 60, icon: $('anchor25269') }); </script>  Antifreeze leaking into the intake maybe -- Royce, 07/06/2005
 use an inner tube, fill to 13lb with compressor, n -- dennie, 07/06/2005
Collapse <a href=../ForumFE/reply.aspx?ID=25273&Reply=25267><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor25273" onclick="return false;">RE: Antifreeze leaking into the intake maybe</a>&nbsp;-- <font color=#0000ff>glenn, <i>07/06/2005</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=25273', contentMargin: 60, icon: $('anchor25273') }); </script>  RE: Antifreeze leaking into the intake maybe -- glenn, 07/06/2005
 RE: Antifreeze leaking into the intake maybe -- walt, 07/06/2005
Collapse <a href=../ForumFE/reply.aspx?ID=25277&Reply=25267><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor25277" onclick="return false;">Probably the Fel Pro intake gaskets leaking</a>&nbsp;-- <font color=#0000ff>Royce, <i>07/07/2005</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=25277', contentMargin: 60, icon: $('anchor25277') }); </script>  Probably the Fel Pro intake gaskets leaking -- Royce, 07/07/2005
Collapse <a href=../ForumFE/reply.aspx?ID=25285&Reply=25267><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor25285" onclick="return false;">RE: Probably the Fel Pro intake gaskets leaking</a>&nbsp;-- <font color=#0000ff>giacamo, <i>07/07/2005</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=25285', contentMargin: 60, icon: $('anchor25285') }); </script>  RE: Probably the Fel Pro intake gaskets leaking -- giacamo, 07/07/2005
Collapse <b>RE: Probably the Fel Pro intake gaskets leaking</b>&nbsp;-- <font color=#0000ff>glennz, <i>07/08/2005</i></font>RE: Probably the Fel Pro intake gaskets leaking -- glennz, 07/08/2005
 No history of problems -- Royce Peterson, 07/12/2005
Collapse <a href=../ForumFE/reply.aspx?ID=26565&Reply=25267><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor26565" onclick="return false;">RE: need help with a 67 390 mustang</a>&nbsp;-- <font color=#0000ff>greg f, <i>01/05/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=26565', contentMargin: 60, icon: $('anchor26565') }); </script>  RE: need help with a 67 390 mustang -- greg f, 01/05/2006
Collapse <a href=../ForumFE/reply.aspx?ID=26579&Reply=25267><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor26579" onclick="return false;">RE: need help with a 67 390 mustang</a>&nbsp;-- <font color=#0000ff>kirk, <i>01/07/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=26579', contentMargin: 60, icon: $('anchor26579') }); </script>  RE: need help with a 67 390 mustang -- kirk, 01/07/2006
 Old wives tale. -- Royce P, 01/07/2006
Collapse <a href=../ForumFE/reply.aspx?ID=26583&Reply=25267><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor26583" onclick="return false;">RE: need help with a 67 390 mustang</a>&nbsp;-- <font color=#0000ff>walt, <i>01/08/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=26583', contentMargin: 60, icon: $('anchor26583') }); </script>  RE: need help with a 67 390 mustang -- walt, 01/08/2006
 RE: need help with a 67 390 mustang -- walt, 01/08/2006
Collapse <a href=../ForumFE/reply.aspx?ID=26586&Reply=25267><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor26586" onclick="return false;">RE: need help with a 67 390 mustang</a>&nbsp;-- <font color=#0000ff>HiRev 352, <i>01/08/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=26586', contentMargin: 60, icon: $('anchor26586') }); </script>  RE: need help with a 67 390 mustang -- HiRev 352, 01/08/2006
 RE: need help with a 67 390 mustang -- glennz, 01/09/2006
Collapse <a href=../ForumFE/reply.aspx?ID=26599&Reply=25267><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor26599" onclick="return false;">RE: need help with a 67 390 mustang</a>&nbsp;-- <font color=#0000ff>davis, <i>01/10/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=26599', contentMargin: 60, icon: $('anchor26599') }); </script>  RE: need help with a 67 390 mustang -- davis, 01/10/2006
 Did he say Print O Seals? I think he meant..... -- Hawkrod, 01/10/2006
Collapse <a href=../ForumFE/reply.aspx?ID=26927&Reply=25267><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor26927" onclick="return false;">RE: need help with a 67 390 mustang</a>&nbsp;-- <font color=#0000ff>edmund, <i>03/04/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=26927', contentMargin: 60, icon: $('anchor26927') }); </script>  RE: need help with a 67 390 mustang -- edmund, 03/04/2006
 Pulling the thermostat can make it hotter -- Hawkrod, 03/04/2006
Post A Response
Name:
Email Address:
Subject:
Post:
Upload Image:
Human Check:   Enter the code 2024165921 in the box