|
|
|
|
Original Message
|
| RE: 390 rebuild |
| By giacamo - 11/22/2005 8:31:27 PM; IP 205.161.194.4 |
| mike on the block i like to tap out all the oil galery holes and install allen plugs in them if you ever get one of thouse littel pushin plugs and thay come out you,l wish you would of did this littel mod.i also run the 4v tipe pistons feds cast, not the 2v tipe, the 4v tipe will give around 10/10,5 compression . i,d also use a comp cam 265h and all the rest of the valve train that maches it and also one pice spring retainers,if you ever sean a two pice retiner fail you,d think a one pice retainer is worth the money.i also use arp rod bolts i also use crome molly pushrods some times the stock ones get bent on a saterday night,i also use the melling hv oil pump,[ not the hp pump ]with good resoults even with a stock pan, but if your going to race it or run it hard alot get a deaper pan,with this combo of parts i,v got 15 390s on the streat some with over 100000miles on them runing i can go on and on but this combo seams to work good with stock exaust and intake |
|
|
This thread, so far...
|
|
|
|
Post A Response
|
|
|
|
|
|