Skip Navigation Links Setup New Post Search Forum Home Home Decoder

Original Message

Cams By Royce P - 01/29/2006 9:38:03 PM; IP 207.69.137.43 The 268H will work with a stock converter and the 3.0 rear. It is a great cam for a heavy car or pickup. Mountains of low and mid range torque. The 280H will be pretty choppy at idle in a 390, you would need at least 10:1 compression, a 2500 stall converter, at least 3.50 rear axle ratio and headers. You absolutely need an MSD or Crane 6 series or better ignition to run a cam with this much overlap in a 390. It is a good cam for a lighter car like a Mustang or Fairlane. Lots of mid to upper RPM power.

This thread, so far...

Skip Navigation Links.  engine build -- eddie mcmanus, 01/29/2006 Cams -- Royce P, 01/29/2006  RE: Cams -- eddie mcmanus, 01/29/2006  268H is way more than the stock 390 GT cam -- Royce P, 01/30/2006  Try again -- Royce P, 01/30/2006  RE: engine build -- giacamo, 02/01/2006  280h -- Dusty, 02/01/2006

Post A Response

Subcribe

Name: Email Address: Subject: Post: Upload Image: Human Check:   Enter the code 202434623 in the box