|
|
|
|
Original Message
|
| RE: Hydraulic Clutch in FE 428 '69 Mustang |
| By mick - 03/24/2006 10:20:24 PM; IP 220.237.118.81 |
| I tried the same conversion on my 69 fastback 428 with world class T5. Fitted a 3/4"master cylinder from JMC Mustang , San Diego . Was running a Hays long style pressure plate and clutch with F100 clutch fork and 78 Aussie Falcon slave cylinder on a home made bracket. It worked but much too heavy for street use. Have since changed to a late model F150 diaphragm plate and clutch with a Howe racing hydraulic throw-out bearing. The shim kit provided is tricky to install for continuous trouble free use so I fitted a screw-adjuster and the whole set - up works and certainly OK for heavy traffic. |
|
|
This thread, so far...
|
|
|
|
Post A Response
|
|
|
|
|
|