Skip Navigation Links
Setup
New Post
Search
Forum Home
Home
Decoder

Original Message
RE: Welding a brazing both take talent.
By walt - 06/01/2006 10:42:41 PM; IP 68.79.80.27
there was a post from fords tsbs about casting problems and how to repair them,and i did mentoin about probs at the mmc earlier,the crack in the lifter valley,can be brazed,dependinding how close you are to the lifter bores,my machinist,welder told me could warp the bores,if you have it welded/brazed,put some old lifters in the bore as heat sinks,and when done measure the bores for roundness,i also had a friend that spun # 3 main,tore up the thrust face,block,and cap, the old school welder machinist,passed now,brazed the block and cap,machined them,to fit the thrust bearings,line bored it,still ok 35 years later(427 block)and according to the ford service books ,and the thechnical bulletins,they just used epoxy to correct non stress area casting flaws
This thread, so far...
Skip Navigation Links.
Collapse <a href=../ForumFE/reply.aspx?ID=27466&Reply=27466><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor27466" onclick="return false;">428 split block</a>&nbsp;-- <font color=#0000ff>Dave Bache, <i>05/31/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=27466', contentMargin: 60, icon: $('anchor27466') }); </script>  428 split block -- Dave Bache, 05/31/2006
Collapse <a href=../ForumFE/reply.aspx?ID=27471&Reply=27466><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor27471" onclick="return false;">my 390 D3TE block developed a similar crack</a>&nbsp;-- <font color=#0000ff>Barry B, <i>05/31/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=27471', contentMargin: 60, icon: $('anchor27471') }); </script>  my 390 D3TE block developed a similar crack -- Barry B, 05/31/2006
Collapse <a href=../ForumFE/reply.aspx?ID=27473&Reply=27466><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor27473" onclick="return false;">RE: my 390 D3TE block developed a similar crack</a>&nbsp;-- <font color=#0000ff>dave bache, <i>05/31/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=27473', contentMargin: 60, icon: $('anchor27473') }); </script>  RE: my 390 D3TE block developed a similar crack -- dave bache, 05/31/2006
Collapse <a href=../ForumFE/reply.aspx?ID=27475&Reply=27466><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor27475" onclick="return false;">Michigan Casting Center (MCC)</a>&nbsp;-- <font color=#0000ff>Gerry Proctor, <i>05/31/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=27475', contentMargin: 60, icon: $('anchor27475') }); </script>  Michigan Casting Center (MCC) -- Gerry Proctor, 05/31/2006
 RE: Michigan Casting Center (MCC) -- Dave Bache, 06/01/2006
Collapse <a href=../ForumFE/reply.aspx?ID=27481&Reply=27466><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor27481" onclick="return false;">RE: Michigan Casting Center (MCC)</a>&nbsp;-- <font color=#0000ff>HPINXS, <i>06/01/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=27481', contentMargin: 60, icon: $('anchor27481') }); </script>  RE: Michigan Casting Center (MCC) -- HPINXS, 06/01/2006
Collapse <a href=../ForumFE/reply.aspx?ID=27482&Reply=27466><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor27482" onclick="return false;">Welding a brazing both take talent.</a>&nbsp;-- <font color=#0000ff>Gerry Proctor, <i>06/01/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=27482', contentMargin: 60, icon: $('anchor27482') }); </script>  Welding a brazing both take talent. -- Gerry Proctor, 06/01/2006
Collapse <b>RE: Welding a brazing both take talent.</b>&nbsp;-- <font color=#0000ff>walt, <i>06/01/2006</i></font>RE: Welding a brazing both take talent. -- walt, 06/01/2006
Collapse <a href=../ForumFE/reply.aspx?ID=27499&Reply=27466><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor27499" onclick="return false;">Walt, can you elaborate on problems at the mcc?</a>&nbsp;-- <font color=#0000ff>Barry B, <i>06/02/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=27499', contentMargin: 60, icon: $('anchor27499') }); </script>  Walt, can you elaborate on problems at the mcc? -- Barry B, 06/02/2006
 RE: Walt, can you elaborate on problems at the mcc? -- walt, 06/02/2006
Collapse <a href=../ForumFE/reply.aspx?ID=27497&Reply=27466><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor27497" onclick="return false;">RE: Welding a brazing both take talent.</a>&nbsp;-- <font color=#0000ff>HPINXS, <i>06/02/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=27497', contentMargin: 60, icon: $('anchor27497') }); </script>  RE: Welding a brazing both take talent. -- HPINXS, 06/02/2006
 RE: Welding a brazing both take talent. -- walt, 06/02/2006
Collapse <a href=../ForumFE/reply.aspx?ID=27486&Reply=27466><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor27486" onclick="return false;">RE: Michigan Casting Center (MCC)</a>&nbsp;-- <font color=#0000ff>walt, <i>06/01/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=27486', contentMargin: 60, icon: $('anchor27486') }); </script>  RE: Michigan Casting Center (MCC) -- walt, 06/01/2006
Collapse <a href=../ForumFE/reply.aspx?ID=27594&Reply=27466><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor27594" onclick="return false;">RE: Michigan Casting Center (MCC)</a>&nbsp;-- <font color=#0000ff>Dick Holabaugh, <i>06/09/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=27594', contentMargin: 60, icon: $('anchor27594') }); </script>  RE: Michigan Casting Center (MCC) -- Dick Holabaugh, 06/09/2006
Collapse <a href=../ForumFE/reply.aspx?ID=27596&Reply=27466><img src=../images/reply.png width=30 height=10></a>&nbsp;<a href="#" id="anchor27596" onclick="return false;">RE: Michigan Casting Center (MCC)</a>&nbsp;-- <font color=#0000ff>walt, <i>06/10/2006</i></font><script type="text/javascript"> new HelpBalloon({ dataURL: 'replyb.aspx?ID=27596', contentMargin: 60, icon: $('anchor27596') }); </script>  RE: Michigan Casting Center (MCC) -- walt, 06/10/2006
 RE: Michigan Casting Center (MCC) -- walt, 06/10/2006
Post A Response
Name:
Email Address:
Subject:
Post:
Upload Image:
Human Check:   Enter the code 202411818 in the box