|
|
Original Message
|
RE: Not with that #. Check R/H block for cast ID [n/m] |
By M Jones - 10/04/2000 10:28:45 PM; IP 12.78.121.116 |
I ran into one like this at a salvage yard in washington DC. could not find any numbers anywhere on the block not behind the starter, or by the oil filter housing, right side left side nothing anywhere. The yard owner swore it was a 390, further investigation found it was a early 60's truck engine. numbers on intake will tell about the intake more than anything I would never use that info only to try to ID an engine, like others have said take out the spark plug and measher the stroke that will narrow it down,to be sure take off head and measher the bore and the two together will tell you for sure. |
|
This thread, so far...
|
|
Post A Response
|
|
|
|