|
|
Original Message
|
RE: Need FE help quick!!! |
By Will - 11/17/2000 8:27:34 PM; IP 24.26.244.78 |
The rocker shaft bolts should be 40-45 ft-lbs.
The long one (necked down) goes in the stand that has the oiling hole. That should be #3 and #6 cylinders.
The oil return pan goes on first, then the rocker shafts (with stands). The washer's go right under the heads of the bolts.
Make sure you have the shaft right side up. The oil holes should be on the bottom.
I think the steering box was unpainted, so it should be painted with cast-blast to prevent it from rusting. I think that looks a lot nicer than painting with clear. The tags, etc on the steering box are not cast, though. I'm not sure how you can restore them. Since you've got a real Shelby, I'd call one of the better Mustang/Shelby parts houses and ask them. Personally, I'd call Branda. |
|
This thread, so far...
|
|
Post A Response
|
|
|
|