|
|
|
|
Original Message
|
| re: 390 blocks |
| By david - 01/19/2001 5:51:08 PM; IP 216.114.16.132 |
| Many of you may have been reading my questions on heads and exhaust manifolds for my 390 in my 67 cougar, anyway I think now I have a different problem; I bought new motor mounts for my 390 from the parts house. I took them out of the box today and found that they werenot going to fit. I called the parts house and double checked part no.s', and they are the right ones so Im told. What I have is a 390 produced in 65 as I have the intact tag from the enine. The bolt pattern for the mounts is 3 tapped holes in the casting in a triangular pattern, two towards the front of the enine, one behind that. The mounts I bought have two bolt ears on them in a horizontal line. And of course the perpendicular ears that fit to the body with the long bolt that connects the two. Does anyone know if ford cast a different block in 65 from in 67 and latter. And if they did what the heck can I use for motor mounts? Thanks David |
|
|
This thread, so far...
|
|
|
|
Post A Response
|
|
|
|
|
|