|
|
|
|
Original Message
|
| RE: 360 hop up |
| By RC Moser - 02/14/2001 3:47:24 PM; IP 152.163.205.22 |
| Ace, you probably need to price some of the aftermarket parts to see if it's worth the cost. If you want to do the 360 I suggest a mild upgrade in pistons to get the compression up to or around 9.0 to 1, A mild RV cam, and al. intake, if nothing else for the weight saving along. Then a good carb. The stock 4100s are good and easy to adjust and rebuild. Mybe some one else will suggest a good aftermarket carb. I heard of the demons, but personally have owned one. Now for the torque and HP I say a good guess would be around 290 HP and about 325 lbs of torque between 3000 to 3800 RPM. And probably done around 4800 RPM. As for Stanley pretty much don't like FEs, but, usually gives good advise. But, remember we are not buying the parts, so the hard decisions are up to you. Maybe this will spark some more responses disputing my theory's. |
|
|
This thread, so far...
|
|
|
|
Post A Response
|
|
|
|
|
|