Skip Navigation Links Setup New Post Search Forum Home Home Decoder

Original Message

RE: 1974 F-100 with a 390 By KarlJay - 02/22/2001 3:48:32 AM; IP 207.95.4.239 I was told my 73 F250 4X4 had a 390 and later found it was only a 360 and so I bought the 390 rebuild kit with crank, later I upgraded to the 428 crank. I've heard that most came with the 360, but that's just rumor. The truck usually had lower compression than the cars and the HP of the stock 390 is about 265~315 with 427 TQ. The truck version with lower compression will have less. If you can look at the flywheel end of the crank, the square notch cranks are 390 the half-moon ones are 360. Check http://www.ford-trucks.com for more info and they have a link to a VIN number place to check all the options.

This thread, so far...

Skip Navigation Links.  1974 F-100 with a 390 -- Ryan, 02/21/2001  RE: 1974 F-100 with a 390 -- ANT, 02/21/2001  Try this link -- Dave Shoe, 02/21/2001 RE: 1974 F-100 with a 390 -- KarlJay, 02/22/2001  RE: 1974 F-100 with a 390 -- Jim D, 02/22/2001  RE: Same thing happened to me! -- pete, 02/22/2001  motor manual will help -- Tyrel Brandt, 02/24/2001  I bought the kit from PAW and regret it -- KarlJay, 02/25/2001  RE: I bought the kit from PAW and regret it -- ANT, 02/26/2001

Post A Response

Subcribe

Name: Email Address: Subject: Post: Upload Image: Human Check:   Enter the code 2025104455 in the box