|
|
Original Message
|
RE: Engine ID Help! |
By kevin - 03/28/2001 10:03:26 AM; IP 209.240.220.240 |
You probably have a 360 cu in engine on your hands. Easiest way to tell is by bore size. Grab a rule and see if it is 4 inch bore, 4.05 actually. A 330 medium duty engine has less than a 4 inch bore. Look at the pistons and see if they say 390 or 360 on the side also, that would verify a 360 also. The 2TA crank and C7 rods were used in both. |
|
This thread, so far...
|
|
Post A Response
|
|
|
|