|
|
|
|
Original Message
|
| 428 with Longer Rods |
| By david kiser - 07/03/2001 11:23:52 AM; IP 143.209.20.223 |
| I'm considering using the longer 360 type conn rods in my 428 and fly-cutting the top of stock type 428 cast pistons to get to zero deck height. This is a cheap way for me to get increased compression as I can get the pistons modified for nothing and already have the longer rods. I'd use new rod bolts and have the bottom end balanced. I've got the 6006 Edelbrock Al. heads and cam lift is less than .600"(hydraulic). Intake is Performer RPM with 850 dp Holley. OEM type adj. Rockers with Chrome Moly pushrods. Motor will be street driven and kept to 5500-6000 rpm. I'd appreciate any comments/suggestions on this Rod/piston combination. THanks in advance, David |
|
|
This thread, so far...
|
|
|
|
Post A Response
|
|
|
|
|
|