|
|
Original Message
|
RE: 447 Stroker |
By Mel Clark - 08/18/2001 10:34:27 PM; IP 64.12.101.172 |
The pistons were from a 300 hp H-M Marine engine. There is, if memory serves, about an .80 dish in the piston so all you are removing is about .020 from the top of the piston. With regular Ford pistons you might see air doing the same thing. As the stroke increase is .200, 3.78 to 3.98, you only remove 1/2 the amount of stroke from the top of the piston. It works fine. |
|
This thread, so far...
|
|
Post A Response
|
|
|
|