Skip Navigation Links Setup New Post Search Forum Home Home Decoder

Original Message

390 rebuild By sunnyb - 10/24/2001 4:30:38 PM; IP 24.69.255.205 thanks for the info dave, i rebuilt the 390 and had the heads "done" bottom end was superclean, crank was mint. bores were good so i just honed them and put in new rings, got a new stock cam and lifters, new main bearings, cam bearings, rod bearings and rod bolts, my intake is a 2bbl, got the intake and block hot tanked, new carb, water pump, alternator, regulator, wires, clutch plate/bearing, and basically everthing i could touch. the whole thing took two weeks and my buddy did all the mechanical (with a little help from me) and i did all the prep and paint. (i took a load of stuff to work and bead blasted for days) so far i've put on 600 city miles and it's running like a top, no problems. thanks again and the fe forum. i put up a handful of pics of the rebuild so you can see what we did. here it is: http://sunnyb.iwarp.com thanks again, -sunnyb.

This thread, so far...

Skip Navigation Links. 390 rebuild -- sunnyb, 10/24/2001  I'm digging the colors. -- Dave Shoe, 10/25/2001  RE: Eastwood's High temp -- Mike McQuesten, 10/26/2001

Post A Response

Subcribe

Name: Email Address: Subject: Post: Upload Image: Human Check:   Enter the code 2024133945 in the box