Skip Navigation Links Setup New Post Search Forum Home Home Decoder

Original Message

RE: Re; 390 breathing system By Royce Peterson - 01/04/2002 1:24:16 PM; IP 205.188.195.32 David, The plastic spacer is there to keep the fuel from boiling in the carb during heat soak after shutdown. The engine will be hard to start when hot without the spacer. There are no vacuum connections or any other connections on the spacer. It is there strictly as an insulator. The PCV u - tube connects to the front and rear of the intake and to the PCV valve in the passenger side valve cover. The oil filler cap is a plain vented one. Be sure to get a PCV valve that is correct for your application, the wrong one might act like a vacuum leak and give you problems with power brakes, hesitation etc. I think Mr. Fomoco has some originals left in stock. Hope this helps, Royce Peterson

This thread, so far...

Skip Navigation Links.  Re; 390 breathing system -- David Siedschlag, 01/03/2002  RE: Re; 390 breathing system -- R Shannon, 01/04/2002 RE: Re; 390 breathing system -- Royce Peterson, 01/04/2002  RE: Re; 390 breathing system (Royce) -- David Siedschlag, 01/04/2002  RE: Re; 390 valve on pass. side exhaust -- David Siedschlag, 01/04/2002  RE: Re; 390 valve on pass. side exhaust -- Royce Peterson, 01/04/2002

Post A Response

Subcribe

Name: Email Address: Subject: Post: Upload Image: Human Check:   Enter the code 2024134354 in the box