|
|
|
|
Original Message
|
| RE: flow numbers on the tunnel port heads?? |
| By Mike Braun - 11/23/2002 11:12:19 PM; IP 205.188.209.76 |
Hello,
I have a set of TP heads that have had some port work (not radical though) I flowed them and they flow
383 cfm intake @ .600" lift and 256 cfm exhaust @ .600" lift. These flow # are at 28" vacuum and with an 1" adapter on the intake side with a mock pushrod tube to replicate the intake manifold. The exhaust is right at the port. Valves are Manley and sizes are 2.25 intake and 1.75 exhaust.
HTH,
Mike
|
 |
|
|
This thread, so far...
|
|
|
|
Post A Response
|
|
|
|
|
|