|
|
|
|
Original Message
|
| what engine do I have? |
| By Big Dave - 02/26/2005 1:39:14 PM; IP 205.188.116.73 |
| Please help! I pulled what was supposed to be a 360 from my 69 f100, and proceeded to tear it down. However, I am having trouble with the engine block ID. On the front, there is a 352, and I know that does not mean much, but on the back it says 66-427. No other cast markings on the outside, not even casting numbers or date codes. It has the external ribbing of an FT or HP block, but no crossbolt bosses ( it does, however have holes drilled on the 2 and 4 mains on the outside of the block as if it were for crossbolts.) The bore is a 4.080, but I tried the drill bit test mentioned in an earlier post, and the 17/64 wouldn't fit, and the 13/64 was a nice fit. No 428 in the water jacket though. And by the way, the crank was the 352/360 crank, and the connecting rods were the long style. And one other thing, on the passenger side of the block, just above where the casting numbers were supposed to be, there is some kind of sticker or painted on decal that has a ford emblem on it. Most of its gone though. |
|
|
This thread, so far...
|
|
|
|
Post A Response
|
|
|
|
|
|