|
|
|
|
Original Message
|
| RE: Spark plugs!!! |
| By gerry - 12/21/2000 7:48:13 AM; IP 208.217.67.189 |
| There is no trick, Jason. You need a 3/8" ratchet, lots of extensions, u-joints, the plug socket, and some bandaids and clean towels to control the bleeding. It is a very tough job and requires some thought as to how those plugs by the shock towers are going to come out, especially if you have the air tubes in the heads. You will have a straight shot at only a couple of the plugs...the remaining plugs require the extensions and at least one u-joint connection. Give yourself a couple of hours and have your wife standing by to call 911 should you need a visit to the emergency room. |
|
|
This thread, so far...
|
|
|
|
Post A Response
|
|
|
|
|
|