| 
     
    
        |   
                       
         | 
     
    
        |   
            Original Message        
         | 
     
    
        
            
	
		| what year block? | 
	 
		| By 406Custom300 - 12/30/2000 2:16:53 PM; IP 63.178.193.211 | 
	 
		I have a block, think it's a 68 or so, at least that's what casting # were on the heads(C8AE-H).  I have looked in ALL the normal spots on the block for a casting number, and can't find one anywhere.  Both sides, front, rear, by the pan rail, by the starter, at the front by the water pump bosses, etc. The only things I see are 352(like most FEs) on front left, and at the rear inside the flywheel are, 66-427, along with the pressure relief boss, undrilled of course.  I know it is a 390 block, the bores measured at 4.080, (has + .030 pistons in it), but I was wanting to know what year casting it was before I have it sonic checked)  I read that later castings were of thinner walls, and not to waste time on overboring them.  I would like to bore it to 4.13, as I have come across a set of 406 pistons, and would like to commence assembly of it.  If this is a later block, I can save the 100 bones or so for the sonic testing, and look for an earlier block.  That is, unless someone wants to donate a 105 block, hehe.  Help me out guys.   | 
	 
 
         |         
     
    
        |   
            This thread, so far...        
         | 
     
    
        | 
            
         | 
     
    
        |   
            Post A Response        
         | 
     
    
        |  
            
         | 
     
    
        | 
            
         | 
     
                                
                                 
                              
                         |