|
|
Original Message
|
RE: Do The Math |
By Mel Clark - 11/08/2001 10:58:50 AM; IP 64.12.101.158 |
To my knowledge all 427 service blocks are 4 bolt main equipped. Ford used the same patterns for the basic castings of the 360-390-427 and 428 service blocks.If you don't want to disassemble the engine and measure it you can put one piston at the bottom of the cylinder and pour liquid through the spark plug hole, being careful to know exactly the amount that you are putting in. Then multiply the number of c.c.s poured in and multiply by 8 which will tell you the approximate cubic inch displacement. Or take a head off and check the size and condition of your engine. 1,000 c.c.s equalls approximately 61 cibic inches, you can do the math from here. |
|
This thread, so far...
|
|
Post A Response
|
|
|
|